ACTi E89 - Manual (Page 10)

www.acti.com
Hardware Manual
10
4) Audio Input / Output
This connector connects to audio input and output devices, such as microphones and
speakers, using the bundled terminal block. See How to Connect Audio In / Out (Optional)
on page 32 for more information.
5) Reset Button
The purpose of reset button is to restore the factory default settings of the camera, including
the administrator ’s password.
The reset button can be used for following purposes:
1. The administrator ’s password has been forgotten and therefore the camera cannot be
accessed.
2. In case of IP address, mask, or allow/deny filter related issues, resulting with inability to
modify these settings.
3. In case of connectivity issues or abnormal video quality.
How to do the reset properly?
Press and hold the reset button for 5 seconds.