Epson 836XL - Manual (Page 25)

Scanner Basics Page 25
Scanning
1 Press the OPERATE button to turn on the scanner. The
OPERATE light comes on.
2 Make sure the scanner’s READY light is on, then turn on
the computer.
3 Open the document cover.
4 Place your original on the document table with the side to
be scanned facing down. Position the document in the
upper left corner as shown.
Note:
Make sure the
document is flat
against the glass
surface so that the
image is properly
focused.
Always close the
lid to prevent
interference from
external light.
Don’t leave
photographs on the
document table for a
long time; they may
stick to the glass.
Keep the document
table clean. See
Cleaning the
Scanner for
instructions.