Eclipse - Fujitsu Ten AVN2210p - Manual (Page 7)

Switching Between the Audio and Navigation Screen
LPF
(Low Pass Filter for
Sub-Woofer output)
Adjust frequency
filtering settings.
Turn to the right
LPF ON :
Only allow lower
frequencies (low range)
through.
Turn to the left
LPF OFF :
Allow all frequencies
through regardless if the
frequencies are low or
high.
LOUD (LOUDNESS)
Accentuate low and
high frequencies
when the volume is
low.
Turn to the right ON
When loudness is ON,
the apparent
deficiency in the high
sounds is
compensated for.
Turn to the left OFF
SVC
(Source Volume
Control)
Set the volume for
each of the audio
sources.
(except for FM)
Turn to the right
Increase the SVC setting
level.
Turn to the left
Decrease the SVC
setting level.
1
Each time you press the [SCREEN] button the display switches between the
audio screen and the navigation screen.
Mode Function [VOL] rotary knob/Function