Westermo RM-505U-K - Manual (Page 46)

505K Radio Telemetry Module User Manual
    ELPRO Technologies Pty Ltd 2008 Page 46
6 SPECIFICATIONS
General
EMC approval EN 300 683
AS 3548
89/336/EEC
Radio approval EN-300-220
Housing 160 x 64 x 36mm
IP66
Industrial-grade painted
aluminium
I/O & Power Connection Weatherproof bayonet
connector
Conxall 6282-7SG-522
Suitable for 0.75 mm
2
conductors
Matching female part supplied
with unit
LED indication Transmit
Operation OK
Configuration mode,
Reading analogue
Flash on transmit
Flash every 5-10 sec
On continuously
Operating Temperature -40 to 60 degrees C 0 – 99% RH
Power Supply
6 - 30 V DC Overvoltage, reverse power
protected
BU-5-2 Battery Pack
(optional)
6 x AA 1.5V alkaline
9V, 1.7 amphour
Duracell MN1500B4 or equiv.
Current Drain <140 µ A
10mA + analogue loop
current
“Sleep” mode
Operating mode
Analogue loop supply Included 24V DC 50mA
Low voltage status User-configurable Can be transmitted to remote
modules
Radio Transmitter
Frequency 869.4 – 869.65 MHz Fixed frequency
Transmit power 500mW
Spurious emissions TX - <-37 dBm
Frequency Stability +/- 1.0 kHz
Expected line-of-sight range 5 km Range may be extended by using
up to 5 intermediate 105U
modules as repeaters,
Antenna Connector Female SMA coaxial
Serial Ports