Westermo RM-455U-D - Manual (Page 79)

455U-D Radio Modem User Manual
Page 80 © May 2010
selects extended response codes. ATQ0 disables all response messages. ATQ1 enables
response messages. The following table describes the messages. A
 symbol indicates that
messages is displayed for the corresponding ATX setting.
Numeric
Code Verbal Message ATX setting Comments
X0 X1 X2 X3
0 OK
   
Valid Command Entered
1 CONNECT

Connection established.
CONNECT baud is displayed for
X1,X2,X3
2 RING
   
Module Received an incoming
connection request
3 NO CARRIER
   
Connection with remote module
lost, or not initiated.
4 ERROR
   
Invalid Hayes command entered.
7 BUSY
 
X0, X1 display NO CARRIER
instead of BUSY
13 RINGING

X0, X1, X2 Don’t display
RINGING message
5 CONNECT 1200
  
CONNECT at 1200 baud
10 CONNECT 2400
  
CONNECT at 2400 baud
11 CONNECT 4800
  
CONNECT at 4800 baud
12 CONNECT 9600
  
CONNECT at 9600 baud
15 CONNECT 19200
  
CONNECT at 19200 baud