Westermo RM-455U-D - Manual (Page 30)

Chapter Three Configuration
Man_455U-D Rev 3.04 Page 31
The opening screen shows an
“empty system”. If configuring a
new system, select “Add new
modem configuration”. In the left
hand column are the 455U units in
the system. To add more units,
select “System”, and “Add new
modem configuration”.
To load the configuration of an
existing module, select “Load new
modem into system” from the
System screen.
3.3.1 Reading and Configuring a module
You will need a connection cable between the PC and the 455U-D. The cable may connect to
either the DB9 port or the RJ45 configuration port. Connecting to the RJ45 configuration port
allows the modem to be configured while the DB9 port remains connected to the functioning
host system. Connecting to the RJ45 port also allows configuration of remote modems in the
system.