Welltech LP-388 Mar-05-2007 - Manual (Page 80)

LAN Phone 388 User’s Manual 79
16
17
18
19
20
21
22
voice
phone
tos
prefix
rom
auth
passwd
Voice information manipulation
Setup of call progress tones and ringing
IP Packet ToS (Type of Service)values
Prefix drop/insert information manipulation
ROM file update
Set configuration items for “administrator” user.
Password setting information and configuration
2. [quit] command
Type quit/exit/close will logout SIP Phone 388 and Telnet Program.
3. [debug] command
This command is for engineers to debug system of SIP Phone 388. User can add
debug flag via command debug –add “debug flags”, and then start debug function
via command debug –open. When SIP Phone 388 is working on screen will display
related debug messages. Most frequently used debug flag are “sip”, “fsm”, “msg”…etc.
4. [reboot] command
After typing commit command, type reboot to restart the SIP Phone 388.
5. [pbook] command
SIP Phone 388 can support 90 phone book data.
1. -print: display phone book data. User can print all data in phone book by command
( pbook –print).