Welltech LP-388 Mar-05-2007 - Manual (Page 62)

LAN Phone 388 User’s Manual 61
4.2.3 System Configuration
(1) Feature Configuration:
Inter Digit Time: Set the DTMF inter digit time (second). To set
the duration (in second) of two pressed digits in dial mode as
timed out. If after the duration user hasn’t pressed next number,
SIP Phone will dial out all number pressed.
Keypad DTMF Type: set DTMF type. User can select DTMF type
SIP Phone transmits.
End of Dial Key: select end of dialing key, e.g. set end of dial key
as * button, after finished pressing dialing number then press *
will dial out.
No Answer Time: default: 120 seconds, 0: Off. When someone
calls to LP388, but LP388 doesn’t pick up, after 120 seconds,
LP388 will send 486 message to caller and stops ringing then
returns IDLE status.
Call waiting: Set to Enable. LP388 can receive the second call
when it’s on conversation.
Private Call ID: Line number will be changed to “Private” when it
makes call, but the function must be supported by PX.
Reject Function: when receiving “Private” call, it will reject this
call.