Welltech LP-388 Mar-05-2007 User Manual
Page 40
LAN Phone 388 User’s Manual
39
Ringer Melody
Melody 1
Melody 2
Melody 3
Forward setting
Busy
No Answer
Unconditional
Disable All
Time setting
User defined time.
5.1 Alarm Setting
There are some definitions for the Alarm clock, please check out the detail as following:
If the alarm clock had been set and the time is up:
The phone will be ring in the IDLE and MENU state only.
If the phone isn’t in the IDLE or MENU state, the phone will ring while the state back to
the IDLE or MENU.
If the state don’t return to the IDLE or MENU for 30 minutes, the clock will cancel and
don’t ring the phone.
Ringing the phone every 20 seconds.
For the ringing tone, depends on the ring melody setting.
Stop ringing until users pick up the phone set or hand free.
5.1.1 Add
This phone set could support 3 entries for the Alarm.
If all the three entries had been taken, LCD will show the message as following and back to
the original page:
→
OK
→
If users enter the incorrect month or date, please show the message as following and back
to the original page:
No Room!!
>New Entry
>
View All