Welltech LP-388 Mar-05-2007 - Manual (Page 24)

LAN Phone 388 User’s Manual 23
Chapter 3 Telephony Operation and Function
1 Power on and initialization
During the initialization procedure:
1 All the LED will light on till the initialization procedure was finished.
2 All the LED will light on if there is error during the procedure.
3 On LCD will show “Initializing”.
2 Making Calls
There are some ways to make outgoing calls:
1 OFF HOOK Dialing
2 Redial (OFF-HOOK Dialing)
3 Pre-Dial (ON-HOOK Dialing)
4 Redial (ON-HOOK Dialing)
5 Dial during connected
6 Memory Dial
2.1 OFF-HOOK Dialing
The maximum digit is 32. But users enter more than 16 digits, the number will move on the
LCD displaying. User can press Speaker button, pick up handset, or press line button to
dial out. The
C
button could delete the digits.
2.2 Redial (OFF-HOOK Dialing)
User can press redial button during off-hook mode, phone will dial out the latest record of
the dialed list.
2.3 Pre-Dial
User can press the numbers while the phone is in the IDLE state then pressing the
SPK
button will change to OFF-HOOK state and dial out this number. The
C
button could delete the digits as same as the OFF-HOOK dialing mode.
During the Pre-dial function:
1 This is permitted to enter and dial out the digits “*” and “#”.
2 If the dialed number could be matched with the list in the phone book, LCD will display