Welltech LP-388 Release 103 - Manual (Page 86)

LP388 User’s Manual 85
10. [pppoe] command
1. -print: display all current configurations and information.
2. –id: to set PPPoE authentication user name.
3. –pwd: to set PPPoE authentication password.
4. –reboot: Select enable or disable this function. If user enables this function, after
PPPoE disconnected, SIP Phone will automatically reboot to re-connect,
and after reboot, if SIP Phone still can’t connect with server, SIP Phone will
keep trying to connect. On the other hand, if user disables this function,
SIP Phone won’t reboot and keep trying to connect. (pppoe –reboot 0/1)
5. –echo: to set PPPoE send echo request function or not. Under some ISP sending
echo request will cause abnormal behavior for LAN Phone, however, if user
disable echo function, when ISP disconnect, LAN Phone will not try to
reconnect. Suggest for most ISPs this function need to be enabled. Please
refer to pppoe –reboot function.