Welltech LP-388 Release 103 - Manual (Page 40)

LP388 User’s Manual 39
„ Ringer Melody
‹ Melody 1
‹ Melody 2
‹ Melody 3
¾ Forward setting
„ Busy
„ No Answer
„ Unconditional
„ Disable All
¾ Time setting
User defined time.
5.1 Alarm Setting
There are some definitions for the Alarm clock, please check out the detail as following:
If the alarm clock had been set and the time is up:
z
The phone will be ring in the IDLE and MENU state only.
z If the phone isn’t in the IDLE or MENU state, the phone will ring while the state back to
the IDLE or MENU.
z If the state don’t return to the IDLE or MENU for 30 minutes, the clock will cancel and
don’t ring the phone.
z Ringing the phone every 20 seconds.
z For the ringing tone, depends on the ring melody setting.
z Stop ringing until users pick up the phone set or hand free.
5.1.1 Add
This phone set could support 3 entries for the Alarm.
If all the three entries had been taken, LCD will show the message as following and back to
the original page:
→ OK
→
If users enter the incorrect month or date, please show the message as following and back
to the original page:
No Room!! >New Entry
> View All