Welltech LP-388 Release 103 - Manual (Page 47)

LP388 User’s Manual 46
Chapter 5 Configuring the SIP Phone through Web
Pages
The HTTPD web management interface provides user an easier way to configure rather
than command line method through TELNET.
The configuration function and steps are similar with the way through command line.
Please refer to the chapter 4-Configuring the SIP Phone through Telnet command lines for
more detail information. Below is a guide for user to configure via web interface.
Step 1. Browse the IP Address predefined via Keypad
Please enter IP address (user have to set via LCD menu first) of SIP Phone in web browser.
If user failed to set IP address via LCD menu, the default IP address of SIP Phone is
10.1.1.3, user can try to connect to SIP Phone via this default IP via web interface.