[time] command, [ifaddr] command – Welltech LP-388 Release 103 User Manual
Page 84
LP388 User’s Manual
83
8. [time] command
When SIP Phone 388 enable SNTP function and be able to connect with SNTP server,
type time command will show the current time retrieved from SNTP server.
9. [ifaddr] command
Configure and display the SIP Phone 388 IP information.
1. –print: print out all current configurations of ifaddr command.
2. -ip, -mask, -gate: Set SIP Phone 388 IP Address, subnet mask and default
gateway respectively.
3. -ipmode: Set SIP Phone network mode to be Fixed IP, DHCP or PPPoE.
When User set IP mode to be fixed IP, please set IP, subnet Mask, default
gateway as mentioned in item 2.
If User set IP mode to be DHCP, SIP Phone will search for DHCP server to
capture IP address after reboot.
If user set IP mode to be PPPoE, please remember to set related parameters
under [pppoe] command.
4. -sntp: When SNTP server is available, enable SIP Phone 388 SNTP function and
assign SNTP server IP address so that SIP Phone can capture current time from
SNTP server. (ifaddr –sntp 1 “xxx.xxx.xxx.xxx”)
5. –autodns: specify the way to obtain DNS server address. When phone is under
DHCP or PPPoE mode, user can let phone to capture DNS server address from
server automatically or specify the address manually.