Welltech LP-388 Oct-12-2007 - Manual (Page 94)

LAN Phone 388 User’s Manual 93
15. [line] command
1. –print : display all current configurations.
2. –fwd:
set forward function.
There are three selections in Forward type, user must select under which condition to
forward calls.
(1) Busy Forward
When SIP-Phone is in busy status, the incoming call will be forwarded to the
assigned phone number.
(2) No Response
When SIP-Phone hasn’t been picked up for around 10 seconds, the incoming
call will be forwarded to the assigned phone number.
(3) Unconditional
It is included the above two types. Whether the SIP-Phone is in which status,
calls will be automatically forwarded to the assigned phone number.
3. –hotline : set hotline number.(‘X’ for disable)