Welltech LP-388 Oct-12-2007 - Manual (Page 84)

LAN Phone 388 User’s Manual 83
20
21
22 rom
auth
passwd
ROM file update
Set configuration items for “administrator” user.
Password setting information and configuration
1. After setting the IP Address of SIP Phone 388 and reboot, (please refer to LCD Menu),
user can enter Telnet command lines.
Note:
2. After user enter SIP Phone configuration via telnet, please use login: ” root ”,
password: null, press enter to enter command lines.
3. If user forget login password, please contact with your distributor, we will
generate one new password according to LAN Phone’s MAC address. Please
login with “mac” and this new password.
4. User must input lower-case command, but contents of configurations such as
SIP alias or user name etc, user can set as capital case.
5. After any change of configuration, please remember to do commit command to
save changes and then reboot command to reboot system.
1. [help] command
Type help or man or ? to display all the command lists. The following figure is shown
all commands of SIP Phone 388.
Command Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
help
quit
debug
reboot
pbook
commit
ping
time
ifaddr
pppoe
flash
sysconf
sip
security
line
help/man/? [command]
quit/exit/close
show debug message
reboot local machine
Phonebook information and configuration
commit flash rom data
test that a remote host is reachable
show current time
internet address manipulation
PPPoE stack manipulation
clean configuration from flash rom
System information manipulation
SIP information manipulation
Security information manipulation
Line information manipulation