Welltech LP-388 Oct-12-2007 - Manual (Page 59)

LAN Phone 388 User’s Manual 58
(c) PPPoE: If user selects PPPoE mode, following items will be
displayed.
- DNS Server Obtained Mode:
When SIP Phone is in DHCP or
PPPoE mode, user can determine DNS address is obtained from
server or set manually.
- Primary DNS Server:
If user determines to set DNS address
manually, please set Primary Domain Name Server IP address
here.
- Secondary DNS Server:
If user determines to set DNS address
manually, please set Secondary Domain Name Server IP
address here.
- PPPoE User ID:
Set PPPoE authentication User Name.
- PPPoE User Password:
Set PPPoE authentication password.
- PPPoE
Retry: Enable/Disable auto-retry function after PPPoE
disconnection. If user enables this function, after PPPoE being
disconnected, SIP Phone will automatically reboot to re-connect,
and after reboot, if SIP Phone still can’t get contact with server,
SIP Phone will keep trying to connect. After re-connected, SIP
Phone will also restart system. On the other hand, if user
disables this function, SIP Phone won’t reboot and keep trying to
connect.
- Send PPPoE Echo Request:
Enable or Disable PPPoE Echo
function. If user enabled this feature, SIP Phone will send out
echo request to check PPPoE connection status. Please notice
that if user disables this function, SIP Phone cannot detect if
PPPoE connection is still alive or not.
- HTTP Port for WEB Management:
Set port number for user to
configure SIP Phone via WEB management. Default value is 80.