Watson-Marlow DF32 - Manual (Page 13)

Operator’s manual
DF32
Rev.: 1.03 Date: 2007-03-12 Page 13 of 32
File:
DF32 OM 1.03 EN
6.5 List of functions
1. Volume 21. Batch number
3. Velocity 24. Print status
4. Acceleration/deceleration 29. Print parameters
5. Reversing (back suction) 31. Save program
6. Batch size 32. Load program
7. Delay 33. Delete program
8. Completed fills 34. Print programs
9. Specific gravity 46. Set language
10. Filling rate 47. Printer set-up
15. Input mode 72. Volume format
18. Timer 2 80. Reset memory
20. Operator number
6.6 Description of functions
The individual functions will be described in the following:
1. Volume
Value: Choice of ml and grams.
Required volume from 0.01 to 9999.9 ml.
3. Velocity
Value: Revolutions per minute (rpm).
Enter the required velocity.
Min.: 30 rpm.
Max.: 500 rpm.
4. Acceleration/deceleration
Value: An integral number.
The filling can start and stop more or less abruptly.
This function offers a choice of values between 1 and 100.
1
= slowest acceleration.
100 = fastest acceleration.
5. Reversing (back suction)
Value: An integral number.
When the filling stops, the filler can be asked to produce a minor back suction to prevent dripping.
The back suction can be set at values between 0 and 10.
0 = no back suction.
10 = maximum back suction.