Watson-Marlow 520Du - Manual (Page 3)

Watson-Marlow 520Du User Manual 3
1 Declaration of conformity
This declaration was issued for Watson-Marlow 520Du pumps on February
1, 2004. When this pump unit is used as a stand-alone pump it complies
with: Machinery Directive 2006/42/EC, EMC Directive 2004/108/EC.
This pump is ETL listed: ETL control number 3050250. Cert to CAN/CSA
std C22.2 No 1010-92. Conforms to UL std 61010A, April 30, 2002.
See 8 Pump specifications.
2 Declaration of incorporation
When this pump unit is to be installed into a machine or is to be assembled with
other machines for installations, it must not be put into service until the relevant
machinery has been declared in conformity with the Machinery Directive
2006/42/EC. See 8 Pump specifications.
Responsible person: Christopher Gadsden, Managing Director, Watson-Marlow
Limited, Falmouth, Cornwall TR11 4RU, England. Telephone +44 (0) 1326 370370
Fax +44 (0) 1326 376009.
The information in this user guide is believed to be correct at the time of publica-
tion. However, Watson-Marlow Limited accepts no liability for errors or omissions.
Watson-Marlow Bredel has a policy of continuous product improvement, and
reserves the right to alter specifications without notice. This manual is intended for
use only with the pump it was issued with. Earlier or later models may differ.
The most up-to-date manuals appear on the Watson-Marlow website:
http://www.watson-marlow.com