Denon S-102 User Manual
Page 31
Get
ting Star
ted
Connections
Set
up
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
ENGLISH
Pla
ybac
k
D.COMP
LFE
CINEMA
MUSIC
To check the currently playing source and various
settings
Listening in the Dolby Headphone Mode
1
Switchtheinputsource(vpage20).
Plug the headphones (sold separately) into the
jack.
The sound from the speakers is automatically cut off.
2
Press
[SURROUND]
toselectthe“DOLBYH/P”.
The “
” indicator lights.
3
Playthesource.
4
Use
[SURROUND PARAMETER]
todisplaythevarious
surroundparameters,thenselectwith
[
o
p
].
[Selectable items]
In the stop mode, press [STATUS].
b
The playback source and the various surround settings are shown
on the display each time the button is pressed.
NOTE
Be careful not to set the volume too high when using headphones.
D.COMP
LFE
Playing Dolby Digital/DTS Multi-
Channel Sources (Digital input only)
1
Switchtheinputsource(vpage20).
(DVDandAUX1digitalinput)
2
Use
[SURROUND]
toselectthe“DOLBYVSREF”or
“DOLBYVSWIDE”.
The “
” indicator lights.
3
Playsourceswiththe
or
marksources.
The “
” or “
” indicator lights, depending on the playback
source’s signal format.
4
Use
[SURROUND PARAMETER]
todisplaythevarious
surroundparameters,thenselectwith
[
o
p
].
[Selectable items]
Playing Dolby Digital/PCM/Analog 2-
Channel Sources
1
Switchtheinputsource(vpage20).
2
Use
[SURROUND]
toselectthe“DOLBYVSREF”or
"DOLBYVSWIDE”.
The “
” indicator lights.
3
Playsourceswiththe
mark.
The “
” indicator lights, depending on the playback source’s
signal format.
4
Use
[SURROUND PARAMETER]
todisplaythevarious
surroundparameters,thenselectwith
[
o
p
].
[Selectable items]
D.COMP
LFE
Listening to Radio Broadcasts
Tuning in Broadcast Stations
1
Press
or
[FM/AM]
toselect“TUNER”.
2
Use
or
[FM/AM]
to select the reception
band.
FM MONO
AM
FM AUTO
3
Use
<+
/
–>
,
[TUNING +
/
–]
or
[
o
p
] to select the
receptionfrequency.
When a station is received, the “TUNED” indication will light.
A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far from
the TV as possible.
Display of the FM broadcast reception status
• When the reception band mode is set to “FM AUTO” and a stereo
broadcast is tuned in, the “ST” indicator lights.
• If the signal is weak and stable stereo reception is not possible, set
the reception band mode to “FM MONO” and receive the program
in monaural. The “MONO” indicator lights.
Main unit <+/–> button
There are two, switchable modes fo <+/–> the tuning mode for setting
the reception frequency (setting upon purchase), and the preset mode
for selecting the preset broadcast station.
n
Switching the preset mode
Pressing <+> while pressing in
“PRESET” is flashes for approximately 5 seconds.
n
Switching the tuning mode
Pressing <–> while pressing in
“TUNING” is flashes for approximately 5 seconds.
Auto tuning
When [TUNING +/–] or [o p] is pressed and held in, the set automatically
starts searching for a broadcast station.
b
Stations whose signal is weak cannot be tuned in.