Denon S-102 - Manual (Page 20)

Pla
ybac
k
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
ENGLISH
Get
ting Star
ted
Connections
Set
up
d TV TYPE
Select video signal format for monitor.
There is no effect with interlaced video outputs.
VIDEO SETUP
Make video output settings to match connected monitor.
F Menu screen F
TV ASPECT WIDE(16:9)
NTSC
a HDMI SETUP
Make settings for HDMI video/audio output.
HDMI SELECT
Make settings for output color space.
[Selectable items]
Y Cb Cr
: Output using YCbCr format.
RGB
: Output using RGB format.
HDMI AUTO FORMAT
Make settings for resolution of HDMI video output signal.
[Selectable items]
PANEL RES.
: Detect monitor panel resolution and automatically set
output resolution.
MAX RES.
: Detect monitor max. resolution and automatically set
output resolution.
HDMI BLACK LEVEL
Make settings for RGB output range.
[Selectable items]
NORMAL
: Use video range from 16 (black) to 235 (white).
ENHANCED
: Video range from 0 (black) to 255 (white) Use this
setting to avoid black washout.
HDMI AUDIO OUT
Select whether to output audio via HDMI. (DVD only)
[Selectable items]
OFF
: Enable audio output via HDMI.
ON
: Disable audio output via HDMI.
[Selectable items]
NTSC
: NTSC monitor is used.
PAL
: PAL monitor is used.
MULTI
: NTSC/PAL compatible monitor is used.
[Selectable items]
AUTO1
: Select mode suitable for film material playback.
AUTO2
: Select mode suitable for 30-frame film material playback .
VIDEO1
: Select mode suitable for video playback.
VIDEO2
: Select this for video sources with little motion.
VIDEO3
: Select this for motion-intensive video sources.
[Selectable items]
OFF
: 4:3 material is stretched to fill 16:9 screen.
ON
: 4:3 material is shown in center of 16:9 screen.
[Selectable items]
4:3PS
: 4:3 monitor is used (For pan & scan sources).
4:3LB
: 4:3 monitor is used 16:9 material is shown
letterboxed.
WIDE(16:9)
: 16:9 monitor is used.
f PROGRESSIVE MODE
Select optimum progressive mode for video material.
g SQUEEZE MODE
Select display method of 4:3 material on 16:9 screen.
s TV ASPECT
Select monitor aspect ratio.
With the “4:3PS” setting, 16:9 pictures are displayed with the left and
right sides cut off. Sources not compatible with panning and scanning
are displayed with black bands at the top and bottom.