Serial interface(s) (data 1 and data 2), Management interfaces, 10/100 ethernet – Verilink WANsuite 5165 (34-00301.H) Product Manual User Manual
Page 216: Supervisory port, Diagnostics
A-2
W A N s u i t e 5 1 6 5
Line Build Out:
0,
−
7.5,
−
15,
−
22.5 dB attenuation
Transient Voltage:
1000 V protection, fused input / output
Jitter Control:
per TR 62411 and T1.403
Timing Source:
With “Function” parameter in Slave mode, timing parameter
is ignored
With “Function” parameter in Network mode, options are
Internal, Network 2, Serial 2
Ones Density:
B8ZS, N x 56 bit stuffing, alternate fill; complies with TR
62411
Serial Interface(s) (Data 1 and Data 2)
Connection: DB-25
female
DTE Ports:
Selectable EIA-530, RS-232, or V.35
Data Rate:
Synchronous, n x 64 kbps (where n = 1–32) or nx56 kbps
(where n = 1
−
31); or Asynchronous,
1200, 2400, 4800,
9600, 19200, 38400, 57600, 115200 bps
Clocking:
Internal, External
Management Interfaces
10/100 Ethernet
Connection:
8-pin modular
Network Protocol:
TCP /IP based networks
Data Rate:
10/100 Mbps
Compatibility:
10/100Base-T
Supervisory Port
Connection:
RJ-11 female
Data Rates:
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
(default: 19.2 kbps)
Diagnostics
Performance:
15-minute and 30-day monitoring (sampled every second)
Network Loops:
Line loopback, payload loopback, or maintenance loopback
(see Figure A.1)
Fractional Loop:
Generates and responds to in-band V.54 loop code
DTE Port Loops:
V.54 and Local
BERT:
Multiple test patterns toward network or DTE ports with
error inject