Specifications -2, Network interface -2, Equipment interface -2 – Verilink PRISM 3101 (34-00212) Product Manual User Manual
Page 6: Management interfaces -2, Diagnostics -2, Alarms -2, Mechanical -2, Environmental -2, Standards -2, Specifications
General 1-2
PRISM 3101/3102
• D4 or ESF line framing, AMI or B8ZS line coding
• Supports Fractional T1 services with flexible bandwidth allo-
cation
• S
LIP
RS-232 standard SNMP interface
• Ethernet or Token Ring NIC for integral LAN (optional)
Specifications
Network Interface
Line Rate:
1.544 Mbps (
±
50 ppm)
Line Framing:
D4 or ESF
Line Code:
AMI or B8ZS
Input Signal:
0 to -27 dB ALBO
Connection:
RJ-48C jack, 100
Ω
(
±
5%)
Output Signal:
3.0 V (
±
10%) base-peak into 100
Ω
with protection
Line Build Out:
0, -7.5, -15, -22.5 dB attenuation
Transient Voltage: 1000 V protection, fused input/output
Jitter Control:
per TR62411 and T1.403
Timing Source:
Internal, recovered line clock,
external DTE
Ones Density:
B8ZS, Nx56 bit stuffing, alternate
fill; complies with TR62411
Equipment Interface
DTE Ports:
3101 single port and 3102 dual port
Compatibility:
EIA530 (RS-422), female DB-25
CCITT V.35, female 34-pin
Data Rate:
Synchronous, Nx56 kbps or
Nx64 kbps (where N = 1 to 24);
independent selection on each port
Clocking:
Internal, External, Oversample
Data Invert:
Independent selection on each port
Management Interfaces
Supervisory Port
Connection:
8-pin modular (RS-232)
Data Rates:
1.2, 2.4, 9.6, and 19.2 kbps
SLIP Port
Connection:
8-pin modular (RS-232)
Data Rates:
1.2, 2.4, 9.6, and 19.2 kbps
SNMP / TELNET Ethernet (optional)
Connection:
8-pin modular
Network Protocol: TCP/IP based networks
Data Rate:
10 Mbps
Compatibility:
10BASE-T
SNMP / TELNET Token Ring (optional)
Connection:
8 -pin modular
Network Protocol: TCP/IP based networks
Data Rate:
4 or 16 Mbps
Compatibility:
Type 3 unshielded twisted pair (UTP)
Diagnostics
Performance:
Monitoring per TR54016 and T1.403
Network Loops:
Line loopback, payload loopback, or
maintenance loopback in the network
direction
Fractional Loop:
Responds to inband V.54 loop code
DTE Port Loops:
Bidirectional loop toward DTE and Net
T1 DTE Loops:
Line loop toward DTE
Maintenance loop toward DTE
BERT:
Multiple test patterns toward network or
DTE ports
Alarms
Activation:
Programmable thresholds
Reporting:
Front panel LEDs, call out on alarm
(COA), SNMP TRAPs
Power
AC:
117 VAC, 0.12 A, 12 W maximum, 41
BTU maximum
DC:
24 VDC, 0.50 A, 12 W maximum, 41
BTU maximum
48 VDC, 0.25 A, 12 W maximum, 41
BTU maximum
Mechanical
Mounting:
Desktop or horizontal rack
Dimensions:
Width 12 inches (30.48 cm)
Height 1.75 inches (53.34 cm)
Depth 9 inches (22.86 cm)
Weight:
4 pounds (1.814 kg)
Environmental
Operating Temp:
32
°
to 122
°
F (0
°
to 50
°
C)
Storage Temp:
-4
°
to 185
°
F (-20
°
to 85
°
C)
Humidity:
95% maximum (non-condensing)
Standards
TR 62411:
December 1990
TR 54016:
September 1989
ANSI T1.403:
1989
TR 54019A:
April 1988
Ethernet:
ISO/IEC 8802-3
Token Ring:
ISO/IEC 8802-5