Verilink PRISM 3101 (34-00212) Product Manual - Manual (Page 45)

SNMP Agent C-5 PRISM 3101/3102
dsx1FarEndIntervalESs: (read-only)
GET: returns the number of Errored Seconds (per 54016) in the
specified 15 minute interval for the Far End
dsx1FarEndIntervalSESs: (read-only)
GET: returns the number of Severely Errored Seconds (per
54016) in the specified 15 minute interval for the Far End
dsx1FarEndIntervalSEFSs: (read-only)
GET: returns the number of Loss Of Frame Seconds (per 54016)
in the specified 15 minute interval for the Far End
dsx1FarEndIntervalUASs: (read-only)
GET: returns the number of Unavailable Seconds (per 54016) in
the specified 15 minute interval for the Far End
dsx1FarEndIntervalCSSs: (read-only)
GET: returns the number of Controlled Slip Seconds (per
54016) in the specified 15 minute interval for the Far End
dsx1FarEndIntervalLESs: (read-only)
GET: returns the number of Bipolar Violation Seconds (per
54016) in the specified 15 minute interval for the Far End
dsx1FarEndIntervalPCVs: (read-only)
GET:returns 0
dsx1FarEndIntervalBESs: (read-only)
GET: returns the number of Bursty Errored Seconds (per 54016)
in the specified 15 minute interval for the Far End
dsx1FarEndIntervalDMs: (read-only)
GET: returns 0
dsx1FarEndTotalTable
dsx1FarEndTotalIndex: (read-only)
GET: (2) - always returns a 2 for the Far End DS1 interface
dsx1FarEndTotalESs: (read-only)
GET: returns the number of Errored Seconds (per 54016) in the
previous 24 hour period for the Far End
dsx1FarEndTotalSESs: (read-only)
GET: returns the number of Severely Errored Seconds (per
54016) in the previous 24 hour period for the Far End
dsx1FarEndTotalSEFSs: (read-only)
GET: returns the number of Loss Of Frame Seconds (per 54016)
in the previous 24 hour period for the Far End
dsx1FarEndTotalUASs: (read-only)
GET: returns the number of Unavailable Seconds (per 54016) in
the previous 24 hour period for the Far End
dsx1FarEndTotalCSSs: (read-only)
GET: returns the number of Controlled Slip Seconds (per
54016) in the previous 24 hour period for the Far End
dsx1FarEndTotalLESs: (read-only)
GET: returns the number of Bipolar Violation Seconds (per
54016) in the previous 24 hour period for the Far End
dsx1FarEndTotalPCVs: (read-only)
GET: returns 0
dsx1FarEndTotalBESs: (read-only)
GET: returns the number of Bursty Errored Seconds (per 54016)
in the previous 24 hour period for the Far End
dsx1FarEndTotalDMs: (read-only)
GET: returns 0
dsx1FracTable
dsx1FracIndex: (read-only)
GET: (2) - if a NIC is not installed
(3) - if a NIC is installed
dsx1FracNumber: (read-only)
GET: returns the channel number (1-24)
dsx1FracIfIndex: (read-write)
GET: returns the number of the interface to which the specified
channel is assigned
SET: This can either allocate a channel to a port, or de-allocate
a channel from a port. In order to be allocated to a port,
the port must either have no channels and the desired
channel to be allocated is idle, or if the port has channels,
then the desired channel must be on the boundary of the
current allocation, and be idle. In order to de-allocate
from a port, the desired channel must be on the boundary
of the current allocation, and the set value is 0.