Verilink 1061 T1 Multicast (34-00268) Product Manual - Manual (Page 13)

Configuration 3-5 1061 Multicast Card
Do not exit the terminal interface
program until the password proce-
dure is fully understood. If a password
has been specified, it must be typed
exactly to reenter the program.
Maintenance Reset
This field will clear all user selectable parameters, perfor-
mance registers, passwords, and alarms but saves the IP
Address. All alarm threshold parameters will be reset to
default values. The unit reloads start-up configuration set-
tings from the default parameters stored in ROM. Pressing
on this field brings up the following warning:
DELETE ALL DATA AND RESTART UNIT?
(NO!) (YES)