Triplett Fox 2 – PN: 3382 - Manual (Page 34)

34
Now, attach one of the clips and the wire attached to it to a
good earth ground. (see Figure 9) The HOUND or HOUND
2 should pickup very little signal from the grounded wire.
Move the HOUND or HOUND 2 along the length of the wire
and note how a strong signal is picked up on one side of the
open fault, and very little signal is picked up on the other
side of the fault.
Figure 9
PU SH ON /OFF
– VOLUME +
STRONG
SIGNAL
OPEN
TRACER TONE
VISUAL CONT. TALK
OFF / POLARITY
AUDIBLE CONT. WARBLE PULSE
CORDLESS
INTERFACE
OVERLOAD PROTECTED
UNLOCK BATTERY TEST
AC / RING
TRIPLETT
REV NORM
WEAK SIGNAL
GROUND