Triplett Fox 2 – PN: 3382 - Manual (Page 16)

16
If testing sensors on a security system, the user can con-
nect the FOX 2 to the wire pair of interest, proceed to the
location of the sensor with the cordless handset, actuate the
sensor, and listen for the cadence change on the handset.
For example, a door or window can be opened and closed to
actuate its magnetic sensor, which is verified by the cadence
change.
120VAC Warning:
The FOX 2 provides an audible warning that 120VAC has
been connected to the product. This is intended to provide
the user with a warning that an unexpected potentially dan-
gerous voltage is present. This feature works in all test
modes. When activated, the FOX 2 begins beeping on and
off. The 9 volt battery must be good for this feature to work.
See the Safety Warnings and Cautions section for additional
information concerning this feature.
120VAC Protection:
The FOX 2 is 120VAC line cross resistant. This means that in
the great majority of cases, the FOX 2 will tolerate the acci-
dental application of 120VAC without damage. This feature
works in all modes. The 9 volt battery is not required for this
to work.
See the Safety Warnings and Cautions section for additional
information concerning this feature.