Triplett Fox 2 – PN: 3382 - Manual (Page 3)

3
• “Trip-Latch” a unique latch testing technique using
“TrueTrace” for testing Alarm Sensors
• Overload Protected - 120VAC Line Cross Protection
• Overload Warning Beeper - alerts user to potential
hazards
• Warble/Pulse Tracer Tone - Selectable tone for audible &
visual ID using Hound or Hound 2 Probe Inductive Tracer
• High Output Tracer Tone
• Generates 2 of 6 user selectable Tracer Tones
• Internal User Selectable Settings - HI/LO Pitch Shift,
Warble/Continuous Tracer Tone, On/Off Audio Pilot Tone,
On/Off Cadence Shift
• Tone/Battery LED - indicates that Tracer Tone is on and
battery is OK
• Audio Pilot Tone - confirms the Tracer Toner signal
• Visual & Audible Continuity Test
• Red/Green Telephone Line Polarity LEDs - also indicates
AC/RING Signal
• Supplies “Talk Power” to allow communicating between
handsets (talksets) or powering a telephone
• Line powered in Tone Mode
• Built in Telephone Ringer
• “Power Latch” - prevents accidental turn-ons
• Magnetic Back - stick the Fox 2 to steel surfaces
• Works with either Hound or Hound 2 Probe Inductive Tracer
• Powered by standard 9 Volt Battery (not included)