Triplett 9055 - Manual (Page 29)

27
CONTROL LOCATIONS AND DESCRIPTIONS (cont.)
1. Humidity & Temperature Sensor
2. LCD Display
3. Function Switch
4. V/Hz%/Ω/Cap/ Temp Input Jack
5. COM Input Jack
6. uA/mA Input Jack
7. 10A Input Jack
8. Sound Level Sensor
9. Light Level Sensor
10. Hz/% Button
Selects Hz or Duty Cycle measurement when DMM is
set to Hz/% range or AC Voltage or AC Current ranges.
11. HOLD and Backlight Button
Press and release quickly (less than 2 seconds) to
HOLD (freeze) the reading on the LCD display. To
remove HOLD, press and release quickly again. To
turn on Backlight, press and hold until Backlight comes
on. To turn off Backlight, press and hold until
Backlight goes off. LCD shows ‘HOLD’ when it is on.
12. °C / °F Room Button
Press to change room temperature readout from °C
to °F .
13. MODE Button
The button to select AC or DC measurement when in A,
mA , and uA …. or select Ω,
, •))) modes. The
appropriate annunciator appears on the LCD to
indicate the selected mode.