Triplett 9055 - Manual (Page 16)

14
2.37 Do not use the meter if it does not appear to work
correctly on all ranges and in all modes. Failure to
observe this precaution may result in damage to the
meter or injury to the user.
2.38 Do not use the meter if it has undergone long-term
storage under unfavorable conditions. Failure to
observe this precaution may result in damage to the
meter or injury to the user.
2.39 Do not use the meter if it may have been damaged
in transport. Failure to observe this precaution may
result in damage to the meter or injury to the user.
2.40 Always connect one of the meter’s alligator clips to
the low side of a power circuit first. Never clamp
onto a hot wire first, (usually red, black, or blue in
AC wiring circuits.) If you clamp onto a hot wire
first, and touch the other probe, you could receive a
shock. Failure to observe this precaution may result
in damage to the meter or injury to the user.