Triangle Magellan - Manual (Page 44)

T R I A N G L E I N D U S T R I E S S . A . S - M A N U F A C T U R E E L E C T R O A C O U S T I Q U E
Avenue Flandres Dunkerque - Z.I. les Etomelles - 02200 Villeneuve Saint Germain - France - T. +33 (0)3 23 75 38 20 - F. +33 (0)3 23 75 38 21
[email protected] - www.triangle-fr.com
44
- BI-AMPLIFICATION
Bi-amplification consists of supplying power to the bass with one amplifier and to the midrange/treble with
another amplifier. Therefore, four monoblock amps or two stereo amps are required. The connection plates
must be removed from the terminals.
For the Grand conert, there must be two cables that connect the two amplifiers to the loudspeaker: one cable
(B) is connected to the Main ln of the midrange/treble terminal and the other cable is connected to woofer 2
(C). A third cable must go from woofer 2 ta woofer 1 (A).
For Concerto, there must be two cables that connect the two amplifiers to the loudspeaker: one cable (A) is
connected to the Main ln of the midrange/treble terminal and the other cable is connected to woofer (B).
LOUDSPEAKER CARE
The cloth provided is sufficient to maintain the loudspeaker. However, if
you wish to use a polishing product, be sure to apply it to a cloth first and
not directly on the loudspeaker’s finish.
Be sure never to apply any product to the diaphragms and to use only the
cloth to remove dust. Never lean on or apply pressure to the diaphragm as
damage could result.
Grand Concert Concerto, Quatuor and Cello