Tri Tool 642SB Clamshell Air and Hydraulic - Manual (Page 43)

43
Model 642SB Low Profile Clamshell
92-0612 Rev. 131230
ACCESSORIES
The following accessories are recommended for use with the Model 642SB
Clamshell and are available from TRI TOOL INC.
1. Model 765RVC Hydraulic Power Supply
for single or dual hydraulic drive systems.
Available in 480 volt, 380 volt and 240 volt configurations
2. The 757RSS Hydraulic Power Supply
For single hydraulic drive systems.
Available in 480 volt, 380 volt and 240 volt configurations
3. Portable Air Filter (P/N 75-0078)
For single or dual air drive systems.
A Filter/Regulator/Lubricator (FRL) is required to protect the warranty on
all TRI TOOL Inc. air driven systems.
4. Portable Air Filter (P/N 75-0100)
For single air drive systems.
A Filter/Regulator/Lubricator (FRL) is required to protect the warranty on
all TRI TOOL Inc. air driven systems.
5. Tool Bits (Refer to the ‘Tool Bits’ section)
6. Counterboring Module Kit (P/N 05-1260)