Machine specifications, Specifications – Tri Tool 576AC Sever Machine with Air Motor User Manual

Page 5

92-1176 : Orig. 041012

576AC SEVERMASTER

with Air Motor

MACHINE

SPECIFICATIONS

IN GENERAL:

The Model 576AC SEVERMASTER™ severs 2.00" to 6.63" (50.8mm
to 168.3mm) diameter tubes and thin wall pipe within the size range. This
machine enhances productivity by incorporation of an Auto-Cycle Tool
Module and Quick Lock Collet Closure. The Auto-Cycle Tool Module
incorporates a cam cycle tool bit feed mechanism which automatically
returns the tool bit to the home position ready to start the next cut. The
tool module also allows setting the start and finish cut position to minimize
the cycle time. The feed increment per revolution is adjustable to match
the cutting relative to the material. A variable speed motor provides
cutting speed control for tool bit life and ID burr condition. The Quick
Lock Collet Closure mechanism actuates the collet with a single lever
stroke and provides for simple collet changes.
Tool bit options are available to minimize the burr on either the mounting
side or the drop-off side of the sever line and in different edge widths to
match the tube wall thicknesses. The Model 576AC also incorporates mount-
ing features to allow use of an SQM-2AC Tube Squaring Module for opti-
mum burr free ends.
The Model 576AC SEVERMASTER™ System, consists of the mainframe
with the Quick Lock Collet Closure, Auto-Cycle Tool Module with adjust-
able depth of feed from .001" to .005" (.02mm to .13mm) per revolution,
drive motor, wrench kit and operator’s manual.

DESIGN AND OPERATING FEATURES:

The Model 576AC accepts its own torque through the collet clamp-

ing system.

The collet provides accurate centering and full diameter support for
minimum distortion of thin wall tubing.

Gear driven powerhead rotates on a precision ball bearing system.

Single lever actuation of collet.

Gears are enclosed for operator safety.

The wrenches that are required for operation of the machine are
supplied.

CUTTING CAPACITIES:

2" pipe schedule 5 thru 40

2 1/2" pipe through 6" pipe schedules 5 and 10.

2.00" through 6.63" (50.8 mm through 168.3 mm) diameter tubing up
to .156" (4.0 mm) wall.

MATERIAL CUTTING CAPABILITIES:

Mild steels, chrome steels (Rc 35 max.), stainless steel, copper-nickel
and aluminum without limitations other than size and wall thickness
as specified.

SPECIFICATIONS