Tri Tool 576AC Sever Machine with Air Motor - Manual (Page 14)

92-1176 : Orig. 041012
TRI TOOL INC.
1 4
Apply fresh lubrication to the tripper shaft assembly and
reinstall it in the bracket.
Screw in the half-dog setscrew until it locates itself in the
slot on the tripper shaft.
Try turning the tripper shaft assembly to insure that the
setscrew is in the slot of the tripper shaft assembly and is
preventing it from rotating.
LUBRICANT RECOMMENDATIONS:
The drive gears require a heavy duty grease such as
“Chevron Ultra Duty Grease, EP, NLGI2”.
The slide rails and tool holder require a light oil such as
SAE 10 light machine oil.
The tripper bracket assembly also require a SAE 10 light
machine oil for normal conditions and under dusty
conditions a silicone, graphite or molybdenum disulfide
‘dry’ lubricant.
A light film of all purpose grease may be used, but it
must be checked for grit contamination frequently.