Tri Tool 224B Single Point - Manual (Page 8)

92-0833 : Orig. 990603
TRI TOOL INC.
8
All components should be cleaned and coated with a light film of oil prior to
use.
If the Model 224B is operated in the vertical position (headstock facing Up),
the chips and/or other debris should be removed after each bevel cut has
been completed.
Tool life may be severely shortened, unless chips and/or other debris that
have been deposited on or around the headstock during the machining op-
eration are removed.
Daily maintenance should include a visual inspection of all parts for damage
due to chips, impact or improper use.
Repair or replace broken or damaged parts as necessary.
Wipe the machine clean of cutting fluids, dirt and grime and then coat it with a
light film of oil.
For complete weekly maintenance procedures, see the Model 224B
BEVELMASTER™ manual.
MAINTENANCE