Tri Tool 224B Single Point User Manual

Page 7

92-0833 : Orig. 990603

Model 224B Single Point

Range, Beveling:

7.00” (177.8mm) DIA to 42.00” (1066.8mm) DIA

cutting range at 37.1/2°.

Bevel Angles:

0° to 37 1/2° graduated bevel angle adjustment.

Range, Flange Facing:

12.00” (304.8mm) DIA to 50.00” (1,270.0mm) DIA
cutting range.

Feed Travel:

5.0” (127.0mm) nominal (radial).

Alignment:

When used in conjunction with the 224B Miter
Mandrel Head:

Angular - plus or minus 5°

Off set - plus or minus .19” (4.83mm)

Feed:

8 selectable positions between .005” (.127mm) rev.
and .032” (.803mm) / rev. inclusive

Cutting:

.200 max. cut depth / pass.

63 RMS finish may be obtained depending on material.

Spiral grooves as coarse as 31 grooves per inch when grooving.

Machines stainless and carbon.