Configuring with the toolbox5 software, 1 configuring with the toolbox5 software – DHD Power Cruiser MADI 52/XR User Manual
Page 24
Version 1.14.0 - 14.04.2010
21
Connecting the Device to a PC
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
Please contact your IT department or your administrator if you need help to install the driver.
7
Configuration and Operation of an 52/XR MADI Router
7.1
Configuring with the Toolbox5 Software
The configuration software is represented by a executable file named Toolbox5.exe. Double click the file Toolbox5.
exe
to start the application.
Note
In this manual only the most important steps to configure an 52/XR MADI
Router with the Toolbox5 software are mentioned. Please find a comprehensive
description of the configuration software Toolbox5 and its functions in the
Toolbox5 manual.
When starting the Toolbox5 for the first time, a second application is extracted, called DHD Communication Server (
DHDCS.exe
). This software is handling the complete communication between DHD Devices and DHD applications on a PC.
To learn more about the DHD Communication Server, please refer to the RM4200D manual, Part 6 “Application
Software Manuals, Chapter 1 - The DHD Communication Server”
. The corresponding manual file is called
“RM4200D_6_appsoftware_en.pdf”
.
Weblink
You can find the above mentioned manual on our website:
The Toolbox5 software does not need any dynamic libraries or other additional files to run. Simply copy the file
Toolbox5.exe
to the desired directory and start it. To uninstall, delete the files Toolbox5.exe and DHDCS.exe.