DHD Power Cruiser MADI 52/XR - Manual (Page 10)

Version 1.14.0 - 14.04.2010
7 General Information
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
4 General Information
Safety Instructions
Ignoring the following safety instructions may lead to accidents with severe, life-threatening injuries,
caused by fire or electric shocks.
Always act according to the directions of this manual.
Fix the device well in a rack or studio furniture with the mounting orientation given by DHD.
Only connect the power cable of the device to a socket, which carries the voltage stated on the specification plate.
Important
Make sure that the ventilation openings of the device are not covered and that
the environmental temperature is ok to assure sufficient heat flow. (See
Installation Guide)
Do not place heavy objects on the device.
Important
Do not place drinking vessels or any other vessels with liquids on the device or
close to it.
The device or parts of the device can get very warm during the usage. Please be careful when touching the device after a
longer operating time.
Important
Changes according to hardware configuration may only be done by qualified
personnel (e.g. exchanging modules).