Teo IPTelephone Network - Manual (Page 60)

Teo IP Telephone Network Administration Guide
Page 60 13-280132 Rev. Q
Line Keys
XML Tag Data / Description
<tone_type>
tone type
tone_type>
Determines the ringing tone type for a line.
1 – 6, default value = 5
<control_type>
ringing type
control_type>
Determines how a line will ring.
ALWAYS (always ring) (default)
NEVER (never ring)
WAIT5
WAIT2 WAIT6
WAIT3 WAIT7 (ring after 7 ring cycles)
WAIT4 Note: 1 ring cycle = 6 seconds
<codec1>
codec type
codec1>
1 st (Preferred) Codec Type:
G711 (default)
G729A
G722
<codec2>
codec type
codec2>
2 nd (optional) Codec Type:
G711
G729A (default)
G722
NONE
<codec3>
codec type
codec3>
3 rd (optional) Codec Type:
G711
G729A
G722 (default)
NONE
<ptime>
milliseconds
ptime>
The requested packetization time for media
transmission to the phone.
10, 20, 30, 40 milliseconds, default value = 20
<jitter_buffer_adaptive>
buffer type
jitter_buffer_adaptive>
Jitter Buffer Type:
ON (adaptive) (default)
OFF (fixed)
<jitter_delay_min>
milliseconds
jitter_delay_min>
Minimum adaptive Jitter Buffer Delay
(only used if jitter_buffer_adaptive is ON):
0 – 280 milliseconds, default value = 10
<jitter_delay_max>
milliseconds
jitter_delay_max>
Maximum adaptive Jitter Buffer Delay
(only used if jitter_buffer_adaptive is ON):
0 – 300 milliseconds, default value = 100
er_delay>
milliseconds
jitter_delay>
Fixed Jitter Buffer Delay
(only used if jitter_buffer_adaptive is OFF):
10 – 90 milliseconds, default value = 35