Teo IPTelephone Network - Manual (Page 11)

Network Setup
13-280132 Rev. Q Page 11
Open WinVi and select Hexadecimal mode from the toolbar. Paste the
parameter data string into the WinVi window, assuring there are no
additional leading or trailing spaces/characters. WinVi will then display the
hex equivalent. Determine the byte length using the line count in the column
on the left side of the window. For example, in this case as illustrated below:
( [16*13] + 3 = 211 decimal) or D3 hex.
Prepend the converted Teo PEN ID 99CC and the converted length D3 in the
Hex window, resulting in the following: