Teo IPTelephone Network - Manual (Page 44)

Teo IP Telephone Network Administration Guide
Page 44 13-280132 Rev. Q
SIP Settings
XML Tag Data / Description
<sip_server_list>
<ss index="index">
<proxy_id>
IP address
proxy_port>
<proxy_port>
port_number
proxy_port>
<registrar_id>
IP address
registrar_id>
<registrar_port>
port_number
registrar_port>
<registrar_enable>
ON/OFF
registrar_enable >
<registration_expires>
seconds
registration_expires >
ss>
.
.
.
sip_server_list>
Up to 10 SIP servers can be configured.
index: 1 – 10, identifies the server, and determines
server priority; 1 is the highest priority.
proxy_id
If , the address will
be configured by DHCPv4 Option 120 or Option 125,
SipProxyServer parameter, if available.
: SIP Proxy Server IP address in valid IPv4 or
IPv6 format.
proxy_port
1025 – 65534, default value = 5060
: Port number used by the phone to send
SIP signaling messages to the proxy server. The form
is xxxxx with leading zeros suppressed. May be
configured by DHCPv4 Option 125, SipProxyPort
parameter.
registrar_id
If left blank or omitted, will be used. This
value is used inside SIP message headers, in the form
@:, to
reference the SIP server.
: IP address or domain name of the SIP
Registrar. May be configured by DHCPv4 Option 125,
SipRegistrar parameter.
registrar_enable
ON (default)
OFF
: Determines if registration with the
SIP Registrar is enabled. If OFF is selected,
registration is not attempted.
registrar_port
1025 – 65534, default value = 5060
: Port number for the SIP Registrar. May
be configured by DHCPv4 Option 125, SipRegPort
parameter.
registration_expires: The number of seconds that the
registration is valid before the phone must reregister
with the SIP Proxy.
Valid range is 10 to 7200 seconds (10 seconds to 2
hours) with leading zeros suppressed.
default value = 3600 (1 hour)
NOTE: Do not use any of the following tags if the
sip_server_list tag if used: