Teletronics IP-PBX Server - Manual (Page 68)

68
• In EZLoop® IP-PBX Enterprise SIP Server, prepare Trunk accounts for EZLoop® PSTN Gateway
FX04/06. (There are 2 default Trunks, 888 and 889, so we use the default setting for this
Example) For more information about Trunk page, please go to user’s manual
CH3- Full Web
Configurations.
Step3: Setup Trunk for EZLoop® PSTN Gateway FX04/06
This Example, we have 1 register to EZLoop® IP-PBX Enterprise SIP Server with Trunk number 888. You
can set the SIP Information of EZLoop® PSTN Gateway FX04/06 by its COM port or you can also login its
WEB interface for configuration as below. Go to SIP Config page to set the EZLoop® PSTN Gateway
FX04/06 as Proxy mode (or Gateway mode), Primary Proxy IP Address and line number (If you set the
EZLoop® PSTN Gateway FX04/06 to Proxy mode, you should set line number for all of the line1 to line4. If
you set the EZLoop® PSTN Gateway FX04/06 to Gateway mode, you can just only set line1 number). Go to
Security Config page to input the registered account (If you set the EZLoop® PSTN Gateway FX04/06 to
Proxy mode, you should set Account for all of the line1 to line4. If you set the EZLoop® PSTN Gateway
FX04/06 to Gateway mode, you can just only set line1 Account). After configure, please press OK  Commit
Data  Reboot System.
Set EZLoop® PSTN Gateway FX04/06 to Proxy Mode, and also set the line number for line1 to line4.