Teletronics IP-PBX Server - Manual (Page 34)

34
Drop. If the called number is 070070101, the EZLoop® IP-PBX Enterprise SIP Server
will add **999 then send **999070070101 as the called number.
 Drop: To drop specified length of number. For example, you set 6 here and you do
not set Add. If the called number is 070070101, the EZLoop® IP-PBX Enterprise SIP
Server will drop 070070 then send 101 as called number.
Note:
•
If you set both of the Drop and Add, EZLoop® IP-PBX Enterprise SIP Server will
Drop first then Add. For example, the EZLoop® IP-PBX Enterprise SIP Server
received a number 070070, which was sending from a non-subscriber of
EZLoop® IP-PBX Enterprise SIP Server, EZLoop® IP-PBX Enterprise SIP
Server will drop 6 digits then add **999 as the destination number. **999 is the
default number of auto attendant. So the caller will hear greeting because the
called number will be routed to auto attendant.
Press Apply to save configuration, or press Cancel to quit configuration.
3.1.6 Dial Group
Dial Group is used to set the [group dialing], you can just input a group number and
set specific members to join the group. Caller can dial the group number and all of the
members will ring.
Enter Configuration Dial Group and press Add New to set Dial Group. Or Modify
to configure the specified Dial Group. Press Delete will delete the specified Dial Group.
Enter Configuration Dial Group and press Add New Press Apply to configure
Dial Group.