Teletronics WLAN Inter-Building AP XI-1500 - Manual (Page 9)

Sep./24
th
/2000 9
Access Point Console
The Wireless Inter -building Access Point can be configured via the command prompt
console with Telnet (TCP/IP) connection.
l Telnet (TCP/IP) Connection : Assign an IP address to your Wireless Inter-building
Access Point through Access Point Utility and then telnet to the Access Point
anywhere to get access to the Access Point console . Then, you will be able to make
the configuration via the TCP/IP connection.
NOTE: The default password to get access to the Access Point is “default”.
For detailed configuration procedures under Telnet, please refer to 11Mbps Wireless
Inter-building Access Point User’s Manual.
Technical Support
You can find the most recent software and user documentation will be updated periodically
on the supplier Web site. If you have difficulty resolving the problem while installing or
using the 11Mbps Wireless Micro Access Point, please contact the supplier for support.