Teletronics WLAN Inter-Building AP XI-1500 - Manual (Page 3)

Sep./24
th
/2000 3
Configuring the Wireless Inter-Building Access Point
The 11Mbps Wireless Inter-building Access Point allows configuration either via the
configuration utility, known as Access Point Utility, Web Management, or remote access
through TCP/IP (Telnet) connection.
Access Point Utility
The following gives instructions guiding you through the installations of the Access Point
Utility.
1. Insert the Software CD-ROM or floppy disk into the corresponding drive on your
computer.
2. Run the setup utility.
3. Follow the on-screen instructions to install the Access Point Utility.
4. Upon completion, execute the Access Point Utility, and it will browse all the Access
Points available on the network.
5. Double click an Access Point icon to access its property dialog box. After entering the
default password, you will be able to view/make configuration of the Wireless
Inter-building Access Point as you desire.