Teletronics WLAN Inter-Building AP XI-1500 - Manual (Page 5)

Sep./24
th
/2000 5
Parameter Description
Information
Include Access Point’s MAC address, frequency domain and
firmware version.
Statistics Monitor the Ethernet and wireless network traffic.
Configuration
Set the Radio mode, IEEE802.11 parameters (ESSID, channel,
RTS threshold, fragmentation threshold), password, IP address,
WEP and Access Control.
Upgrade
Upgrade the firmware of the Wireless Inter-building Access
Point.
Access Control Restrict the accessibility of the wireless devices.
n Set the Radio Mode
From the Access Point Utility, go to the Configuration tab and select IEEE802.11.
You will see there are 5 choices of operation mode for the Access Point (Default value:
AP mode):
Ø Wireless LAN Access Point (AP): Enables the Access Point to act as a wireless
bridge connecting to your network backbone.
Ø Inter-building with Repeating (PxP): Allows for multi-point connection among
buildings.
Ø Station Adapter – Infrastructure (SAI): Served as a wireless station
(infrastructure). Connect the Access Point (SAI) to a PC with a cross over
RJ-45 cable, and it is able to access the network via Access Point (AP).