Teletronics EZBackhaul - Manual (Page 24)

The Spanning Tree Protocol allows redundant connections to be created between different LAN
segments for purposes of fault tolerance.
Link Aggregation
Link Aggregation combines two physical network links into a single logical link for increased
bandwidth. Besides, it provides load balancing.
Basic Wireless Settings
Open “ Radio” in “Wireless” as below and select “RF1” or “RF2” to make basic wireless configuration on
radio card 1 and 2.
Figure 12 Basic Wireless Settings
Operating Mode
Four operating modes are available on the EZBackhaul. In a point to point environment where there
are only two radios, Peer-to-Peer is recommended as it works more efficiently.
Base Station: The EZBackhaul connects directly to the main Ethernet LAN and receives
connectivity from other wireless devices.
CPE: The EZBackhaul connects to a remote LAN and the Base Station in it.
Peer-to-Peer (CSMA): The EZBackhaul connects to another wireless device within the same
networking program using CSMA protocol. CSMA ensures that only one node is transmitting on the
Page 24