Teletronics TBC-800 - Manual (Page 24)

Configuration Examples
TBC-800 system should be installed as close as to the internet gateway ideally. This may
not always be the case, but the system needs to install between gateway/router and user
workstations.
Example #1
You have a small company with 50 users connected to the Internet through a DSL Router.
You have limited bandwidth, so you want to limit internet access speed for most of the
users except Managers. Your network IP address is in 192.168.0.x subnet. You can have
simple rules look like this:
Bandwidth Control Configuration: Default Upload/Download Rate- 56 Kbytes/s
Grouping: Group Name-Manager, Upload/Download Rate-100Kbytes/s
Bandwidth Setting: IP Address-192.168.0.128/28, Group: Manager, Unbounded
QoS Setting: IP Address- 192.168.0.4/32, Protocol-Both, Port- VoIP port, Group- Root,
Bounded, Upload/Download Rate- 200Kbytes/s
In this setting, all the regular users will have default speed of 56 Kbytes/s, and managers
will have 100Kbytes/s. VoIP server will have 200Kbytes/s with specific port. You can
easily change user speed or any setting later on when a different scenario applies.
Example #2
You have a network connected to the Internet through a T1 line. Bandwidth is not an
issue. You do not want a certain division to access internet except uploading files. Your
network IP address is in 192.168.100.x network.
Bandwidth Control Configuration: Default Upload/Download Rate- 100 Kbytes/s
Grouping: Group Name-Upload Only, Upload/Download Rate-100 Kbytes/s
Bandwidth Setting: IP Address-192.168.100.32/29, Group: Upload Only, Bounded,
Upload Rate-100 Kbytes/s, Download Rate- 0 Kbytes/s
In this setting, everyone in the network has both Upload and Download rate as 100
Kbytes/s, except IP address 192.168.100.32-192.168.100.39 which can only Upload 100
Kbytes/s, but not download.
24