Teletronics TBC-800 - Manual (Page 18)

QoS Setting by MAC page allows administrator to define sub-group/leaf class by MAC
address with related Protocols, and Port Numbers. Administrator will have the ability to
assign different Upload and Download rate for each sub-group. This setting can
limit/reserve bandwidth for certain network application/program.
• MAC Address: Enter MAC address that belongs to a specific group you want to
create
• MAC Mask: If you have a series of device with same pre-fix of MAC Address,
you can use this feature to save multiple entries.
• Service Protocol: Filter by TCP, UDP, or Both
• Service Port: Enter the port number of new services. Enter 0 for all ports.
• Group List: Select which Group to be assigned by this setting or it can be
assigned to Root Class
• Bounded: Select Unbounded if you want to inherit and use the rate from parent
Group; Select Bounded if you want to assign a different Upload and Download
Rate for this sub-group
• Priority: Select High, Middle, or Low to prioritize this group/rule
• Upload/Download Rate: Enter Upload and Download rate for this sub-Group.
These rates will only apply if you select Bounded.
To Add a QoS Group
Enter information in all fields
Click Add to create a group
To Remove a QoS Group
Select a group you want to remove from QoS List
Click Remove to delete
To Modify an existing Group
Under QoS List, select the group you want to modify. Enter the new value for IP
Address, Subnet, Protocol, Port, Group List, Bounded, and Upload/Download Rate, or
enter the same value if it’s unchanged. Click Modify to apply.
Click Apply to save and apply the change
18