Tech Source Raptor DL-Lite Drivers for Linux - Manual (Page 11)

3-1
Chapter 3
SOFTWARE INSTALLATION
3.1 Overview
This installation chapter describes how to install and configure
the drivers for the Raptor DL-Lite card.
3.2 Requirements
The following are prerequisites for installing the Raptor DL-Lite
Drivers for Linux Software:
• At least 2MB of disk space available in
/
(root directory)
and
/usr
for drivers.
• A Raptor card is presently installed in the workstation/server
(See Chapter 2 for instructions on installing a Raptor
graphics card).
• Linux kernel v2.2.x or v2.4.x installed
• XFree86 (v4.0 or later) installed and configured for the
current console graphics card
• RPM (v3.0 or later) packaging tools for installing the
package
The device driver and the DDX module for Linux and XFree86
are loadable. No kernel changes or X server rebuilds are
required.